البورسلان أو الخزف

What is porcelain and what are its advantages

What is porcelain and what are its advantages

Today it is possible to produce large sized ceramic tiles 300 x 100 cm, with a thickness of up to 3.5 mm, preserving the mechanical properties and aesthetics of porcelain tiles. In this way, the use of porcelain and its applications is expanded, providing great potential for innovation in the areas of design and interior construction.

Coverlam Porcelain Tile is a 3mm thick ceramic coated tile that is produced by mixing natural raw materials and ground with water, pressed using a technologically advanced pressure system, and then fired into a new hybrid furnace (gas and electricity), which allows among other things to lower emission CO2 gas.

Today, it is used in heavy-load transit areas, interior and exterior walls, floors, and building facades. Its use provides innovative building solutions for facades thanks to its large size. Facades can be installed in fewer steps and includes great diversity in its multiple forms, able to adapt to any required dimensions and due to its minimum thickness, it is considered Porcelain is one of the lightest façade covering materials on the market. For this reason porcelain is highly recommended to implement ventilation facade projects.

البورسلان أو الخزف ما هو وما مميزاته

A wide range of porcelain and porcelain arrangements make it the ideal solution to meet the requirements of adjusting the project facade. Because of how easy it is to handle building and installation work on facades, porcelain greatly reduces replacement problems that often occur during maintenance of a ventilated facade. Although the thickness is low, the porcelain is able to withstand the pressures usually faced by the covering material for ventilated facades.

Thanks to its large sizes, which reduce the number of joints, and its technical characteristics, porcelain is particularly suitable for paving and wall coverings in hospitals, clinics and doctors’ clinics. It is resistant to chemical attack, easy to clean and prevents the appearance of mold, bacteria and fungi. The porous effect of porcelain has now been enhanced thanks to the catalytic coating of H&C tiles. Available in 5.6mm thickness.

In terms of ease of regeneration, the porcelain can be easily placed in the walls and floors, above the top of any material without the need for demolition. This eliminates the typical inconvenience associated with renewals, such as noise, dust, and debris, thus reducing work time. The minimum thickness and low weight facilitate storage and transportation, significantly significantly easier to handle and reduce the logistics costs of packing and transporting.

In terms of interior design, the porcelain shape 100 x 300 cm makes it a suitable material to cover large surfaces, providing all the mechanical and aesthetic properties that distinguish tiles and porcelain. Thanks to the cap and easy handling, porcelain is the ideal material for mounting caps or surfaces requiring fine finishes.

البورسلان أو الخزف ما هو وما مميزاته

So one of the great advantages of porcelain is that it is structurally reinforced by a network of glass fibers with a thickness of 0.5 mm attached to the back, which gives it an ideal mechanical strength and is available in a wide range of shapes and sizes and has resistance to curvature, UV light, and attack by materials Chemical, fire and frost, is also recyclable and the manufacturing process achieves the highest respect for the environment.

Due to the low thickness of porcelain 3.5 mm and 5.6 mm – the weight of porcelain is only 7.8 kg / sq m and 14 kg / sq.m respectively. This makes cutting and handling much easier. As a result, porcelain provides financial savings in projects by enabling faster completion times.

Sustainability of porcelain:

Of course, the porcelain did not neglect the sustainability feature, the lower porcelain thickness allowed the development of a very environmentally friendly and sustainable production process. First of all, the consumption of raw quarry materials is two to three times less than any other type of porcelain tile, in addition to that the production of porcelain requires less energy, which allows the use of a hybrid furnace (gas and electricity) and reduce CO2 emissions annually.

Ventilated facade design using 3.5mm porcelain tiles:

The ventilated facade is a building solution that uses double sheathing apart from each other by a support structure to create a ventilation air chamber. This process creates a chimney effect that activates air currents by convection, improving the building’s acoustic and thermal insulation, and increasing energy efficiency.

Due to their nature and workmanship, 3.5mm Porcelain Tile is a great choice for ventilated facade cladding. Its high weather resistance, dimensional stability and lightness reduce support frame requirements. It weighs 3 times less than traditional porcelain tiles and allows for large layouts, up to 3.6 meters, which reduces the number of connections. It also provides high color fastness, shock resistance and low maintenance over time.

البورسلان أو الخزف ما هو وما مميزاته

The ventilation facades, from inside to outside, consist of a support (a building element that supports the building’s structure), insulation (located outside the support), an air chamber (a cavity between the insulation and the cladding), and a dock (elements that lay the cladding on the building structure) and the cladding (the outer face of the facade) ).

With regard to exposure to water, porcelain has a water absorption of less than 0.1%, and it resists moisture, rain water and even frost. It is an incombustible substance and does not generate droplets of inflamed drops or particles.

Read also: The use of wood in building design

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *